PHILIPS HIGHBAY LIGHTING BY518P LED110/CW PSU NB GM 77W 11000lm 6500K

Philips Highbay lamps are lamps used for areas that require high lighting. This lamp is quite effective for areas such as factory floors, warehouses, corridors, and shop rooms. In this article, you will find out the benefits of using highbay lights, the various types of these lights, as well as various ways of applying them.

Some of the benefits of using Philips highbay are :

• Able to provide brighter light compared to ordinary lamps. This is very suitable for work areas that require brighter light, such as warehouses or factories.
• Using these lamps will also save electricity costs because you only need to turn on one or two lamps to get the same light as many ordinary lamps.
• Apart from that, the lifespan of these lamps is relatively longer than ordinary lamps, so there is no need to replace the lamps every few years.

Specification

General information

• Light source machine type: LED
• CE Mark: CE Mark

Light Engineering

• Luminous Flux : 11,000 lm
• Orrelated Color Temperature (Nom) : 6500 K
• Illumination Power (measured) (Nom) : 143 lm/W
• Color rendering index (CRI) : >80
• Light source color : 865 cool daylight
• Optical cover type : Lens

Operation and Electrical

• Input Voltage : 220 to 240 V
• Line Frequency: 50 or 60 Hz
• Current surge : 0.33 A
• Power Consumption: 77 W
• Power Factor (Fraction) : 0.95
• Number of products in MCB 16 A type B: 8

Temperature

• Ambient temperature range : -20 to +45 °C

Control and Dimming

• Dimmable : No
• Control interface : -

Mechanical and Housing

• Housing material: Aluminum
• Optical cover material: Polycarbonate
• Housing Color: Grey
• Optical covering layer: Matte
• Overall length: 89 mm
• Overall width: 278 mm
• Overall height: 0,06 mm

Consent and Application

• Dust and water ingress protection code : IP65 [Dust penetration-protection, jet-proof]
• Mechanical impact protection code: IK06 [1 J]
• IEC protection class : Safety class I

Initial Performance (IEC Conformity)

• Light flux tolerance: +/-10%
• Initial chromaticity : (0.316, 0.332) SDCM<5
• Power consumption tolerance: +/-10%