PHASE CONTROL RELAY IRCP 8A 2P UC 400

Untuk unduh datasheet produk A9E21180 phase control relay iRCP 8A 400V 50/60Hz 1 OC, silakan klik di sini!

Phase Control Relay Schneider Electric

Phase Control Relay merupakan perangkat kelistrikan yang digunakan untuk melindungi instalasi listrik dan motor listrik yang ditenagai oleh jaringan listrik tiga fase. Phase control relay bisa mendeteksi hal-hal yang dapat merusak motor, seperti tegangan antar fase yang tidak seimbang atau kegagalan tegangan di satu fasa atau lebih. 

Fungsi Phase Control Relay:

• Mencegah kerusakan mesin dan cedera personel dengan memantau penurunan atau peningkatan tegangan secara bersamaan
• Melindungi motor listrik tiga fase terhadap fase yang kolaps
• Mendeteksi kesalahan seperti kegagalan tegangan, tegangan tak seimbang, dan urutan fase yang salah

Karakteristik Teknikal:

• Kode Produk : A9E21180
• Brand : Schneider Electric
• Nama Produk : PHASE CONTROL RELAY IRCP 8A 2P UC 400
• Keterangan : COMMAND CONTROL RCP SCHNEIDER ELECTRIC  - A9E21180
• Arus Pengenal : 8A
• Jumlah Kutub : 2P
• Komposisi Kontak Sinyal : 1 C/O
• Frekuensi Operasi : 50/60 Hz
• Hysteresis : 5%
• Tegangan Suplai Pengenal : 400 V AC
• Tinggi : 88,1 mm
• Lebar : 36 mm
• Kedalaman : 67 mm
• Berat : 0,21 kg
• Warna : Putih (RAL9003)
• Tingkat Perlindungan Phase Control Relay Schneider Electric A9E21180 : IP20

Anda dapat berbelanja dengan aman di ListrikKita.com karena semua barang yang kami jual dijamin 100% asli, bergaransi resmi, dan dapat disertai dengan surat keaslian barang. Untuk informasi lebih lanjut atau ingin melakukan pembelian dalam jumlah besar bisa menghubungi tim sales atau marketing kami, dengan klik di sini. Selamat berbelanja!

This Acti9 iRCP is a Phase control relay. The voltage measurement range is 0.15VAC to 10VAC. It monitors phases and the presence of voltage on the 3 phases of a 3 phase circuit power supply. It indicates also any phase loss or inversion. It supplies 1 fail-safe change-over contact. The parameter setting is done on the front panel by direct scale by using a screwdriver. It could be used for example to control the power supply of a 3-phase motor. The precision of the display is +/- 10% of the full scale. The time delay on tripping is 0.3s. The Uc supply voltage is 400VAC +/- 15%. The operating frequency is 50Hz or 60Hz. The output by changeover contact current is 8A under 250VAC with cos phi equal to 1. On the front face green led indicates the voltage presence. The red led indicates a fault. The consumption is 3VA. The dissipated power is 2W. The width in 9mm pitches is 4. The degree of protection is IP20. The dimensions are (W) 36mm x (H) 88,1mm x (D) 65mm. The operating temperature is -5°C to + 55°C. The storage temperature is -40°C to + 80°C.

Specification

Type of electric connection	Screw connection
Voltage type (supply voltage)	AC
Supply voltage AC 50 Hz	400 Volt
External power supply required	FALSE
Supply voltage AC 60 Hz	400 Volt
Height	88.1 Millimetre
Width	36 Millimetre
Rated switch current	8 Ampere
Voltage measuring range	0.15…10 Volt
Phase sequence monitoring	TRUE
Function over voltage detection	FALSE
Phase imbalance monitoring	TRUE
Depth	67 Millimetre
Phase failure detection	TRUE
Function under voltage detection	FALSE
Number of contacts as normally open contact	0
Number of contacts as change-over contact	1
Number of contacts as normally closed contact	0
With detachable clamps	FALSE
Max. permitted off-delay time	0.3 Second

Documents

• Catalog - Acti9 Catalog - 2017
• Instruction sheet - iRCP Phase control relay - A9E21180 - Instruction Sheet