HIGHBAY LIGHTING BY239P 100W COOL WHITE

Philips Highbay lamps are lamps used for areas that require high lighting. This lamp is quite effective for areas such as factory floors, warehouses, corridors, and shop rooms. In this article, you will find out the benefits of using highbay lights, the various types of these lights, as well as various ways of applying them.

Some of the benefits of using Philips highbay are :

• Able to provide brighter light compared to ordinary lamps. This is very suitable for work areas that require brighter light, such as warehouses or factories.
• Using these lamps will also save electricity costs because you only need to turn on one or two lamps to get the same light as many ordinary lamps.
• Apart from that, the lifespan of these lamps is relatively longer than ordinary lamps, so there is no need to replace the lamps every few years.​​​​​​​

Specifications

General Information

• Light source engine type : LED
• Value ladder : Value

Light Technical

• Luminous Flux : 13,000 lm
• Luminous Efficacy (rated) (Nom) : 130 lm/W
• Correlated Color Temperature (Nom) : 6500 K
• Color rendering index (CRI) : >80
• Light source color : 865 cool daylight

Operating and Electrical

• Input Voltage : 220 to 240 V
• Line Frequency : 50 or 60 Hz
• Inrush current : 40 A
• Power Consumption : 100 W
• Power Factor (Fraction) : 0.95
• Number of products on MCB of 16 A type B : 8

Temperature

• Ambient temperature range : -20 to +45 °C

Controls and Dimming

• Dimmable : No
• Control interface : -

Mechanical and Housing

• Housing Material : Aluminum die cast
• Optical cover material : Polycarbonate
• Housing Color : Dark gray
• Optical cover finish : Clear
• Overall height : 93 mm
• Overall diameter : 273 mm
• Effective projected area : 0.06 m²
• Optical cover type : Lens

Approval and Application

• Ingress protection code : IP65 [Dust penetration-protected, jet-proof]
• Mech. impact protection code : IK06 [1 J]
• Insulation Coverage Rating : Partial coverage acc. to IEC 60598-1 8.1
• Protection class IEC : Safety class I
• CE mark : CE mark
• Flammability mark : -

Initial Performance (IEC Compliant)

• Luminous flux tolerance : +/-10%
• Initial chromaticity : (0.316, 0.332) SDCM<5
• Power consumption tolerance : +/-10%