Electrical protection is not only about using MCBs or other overcurrent protection devices. Voltage surges also need attention because they can damage electrical and electronic equipment. As an official Schneider Electric distributor, Listrik Kita provides original and warranty-backed products for various electrical protection needs.
One of the devices designed for this purpose is a Surge Protective Device (SPD). An SPD helps protect electrical installations from sudden voltage surges. So, how does an SPD work, and why is it important to install one in an electrical panel?
What Is an SPD and What Does It Do?
A Surge Protective Device, or SPD, is a device designed to limit transient overvoltage in an electrical system. Voltage surges can occur for several reasons, including lightning activity that directly or indirectly affects an electrical network.
When a surge occurs, the voltage can rise far above its normal level in a very short period. This condition can damage electronic components, control systems, and electrical equipment connected to the installation.
An SPD helps redirect excess surge energy to the grounding system, limiting the amount of voltage that reaches connected equipment. This makes an SPD an important part of an electrical protection system.
How Does an SPD Protect an Electrical Installation?
SPD Stays on Standby During Normal Conditions
Under normal electrical conditions, the SPD remains in standby mode. It does not actively divert current because the system voltage is still within its normal operating range.
The SPD remains installed in the electrical panel and is ready to respond when a sudden overvoltage occurs. In other words, it provides protection without interfering with normal electrical operation.
SPD Responds Quickly to Voltage Surges
When a surge occurs, the SPD responds quickly to help limit the overvoltage in the system. This fast response is important because voltage surges can happen within a very short period.
Surges can come from lightning or certain disturbances in the electrical network. With an SPD installed, excess energy can be redirected through the protection path instead of being fully passed on to connected equipment.
SPD Diverts Surge Current to Ground
When a voltage surge is detected, the SPD helps divert the surge current toward the grounding system. This process helps limit the voltage that reaches the electrical installation and connected equipment.
For this reason, a properly designed grounding system is also important when installing an SPD. The right SPD should be selected and installed correctly to achieve effective protection.
Why Should an SPD Be Installed in an Electrical Panel?
Protection Against Lightning
Lightning can generate a very large amount of energy and cause voltage surges in an electrical installation. Even when lightning does not directly strike a building, induced effects or disturbances in the electrical network can still create surges.
An SPD helps limit the impact of these voltage surges and reduce the risk of damage to connected equipment and electrical installations.
Helps Prevent Electronic Equipment Damage
Modern electrical systems use more sensitive electronic components than ever before. Computers, PLCs, inverters, control systems, communication equipment, CCTV systems, and other electronic devices can be affected by transient overvoltage.
Installing an SPD in an electrical panel can improve surge protection and reduce the risk of damage to sensitive equipment.
Improves Electrical Safety
Voltage surges can damage electrical and electronic components. Without proper protection, these disturbances may affect the overall safety and reliability of an electrical installation.
An SPD provides an additional layer of protection by helping limit the energy caused by a surge. However, it should be used together with other appropriate protection devices and a properly designed grounding system.
Reduces Downtime and Repair Costs
Surge-related damage is not only about replacing damaged components. In commercial and industrial environments, equipment failure can interrupt operations and result in costly downtime.
By providing surge protection, an SPD can help reduce the potential for equipment damage and operational interruptions. Preventive protection can therefore be a valuable investment for maintaining electrical system continuity.
Supports Electrical Installation Standards
Electrical installation planning should consider different types of risks, including transient overvoltage. Using an SPD can be part of an overall protection strategy, especially in buildings or systems with many sensitive electronic devices.
An SPD should not be selected randomly. The electrical system characteristics, protection requirements, grounding system, and installation location should all be considered to ensure the device performs as intended.
What Should You Consider When Installing an SPD?
Choose an SPD Based on the Electrical System
An SPD should be selected according to the characteristics of the electrical installation it will protect. System voltage, installation configuration, and the required level of protection should all be considered before choosing a product.
Make Sure the Grounding System Is Proper
Grounding plays an important role in diverting surge current. Therefore, the condition and design of the grounding system should be considered when planning SPD protection.
Choose the Right Installation Location
The SPD location inside the electrical panel should be carefully planned so the protection path can work effectively. For some installations, a coordinated or multi-stage protection approach may be considered depending on the system requirements.
An SPD is more than just an additional component in an electrical panel. It plays an important role in helping limit voltage surges that can disrupt an electrical installation and damage sensitive equipment. With the right protection system, the risk of equipment damage, downtime, and surge-related repair costs can be reduced.
If you are looking for original and warranty-backed Schneider Electric SPD products, Listrik Kita provides various electrical products and protection solutions. Find and buy Schneider Electric SPD at Listrik Kita to help improve protection for your electrical installation.