MCB Fuji Electric
A miniature circuit breaker (MCB), also called a miniature circuit breaker Fuji Electric, is an electromechanical device that functions as a protector of electrical circuits from excessive current and can cut off the electric current automatically when the electric current passing through the MCB Fuji Electric exceeds a specified value. However, when the current is in normal conditions, the MCB Fuji Electric can function as a switch that can connect or disconnect the electric current manually.
1. MCB DF 6kA Fuji Electric
- Curve C (magnetic trip between 5 to 10ln)
- Rated current 2, 4, 6, 10, 16, 20, 25, 32, 40, 50, 63A
- Standard SNI IEC 60898-1:2009 : 6kA (230/400VAC) 1P, 400VAC 2P 3P
- Standard IEC 60947-2
2. MCB DF 10kA Fuji Electric
- Curve C (magnetic trip between 5 to 10ln)
- Rated current 2, 4, 6, 10, 16, 20, 25, 32, 40, 50, 63A
- Standard SNI IEC 60898-1:2009 : 10kA (230/400VAC) 1P, 400VAC 2P 3P
- Standard IEC 60947-2
Low Voltage Fuse Fuji Electric
A fuse is a component that functions as a safety device in electronic circuits and electrical devices. A fuse consists of a fine wire that will melt and break if excessive electric current is applied or a short-circuit interaction occurs in electronic or electrical equipment.
1. Fuse tipe FCF dan FCK (Current Limiting Fuses) Fuji Electric
- Voltage rating: 500 VAC
- FCF up to 60A
- FCK up to 600A
2. BLC, CR dan CS (Super Rapid Fuses) Fuji Electric
- 150 to 1500 VAC
- 10 to 4700A
- BLC 100kA at 550VAC
- CR2L 100kA at 250VAC
- CR2LS 100kA at 250VAC
- CR6L 100kA at 600VAC