CABLE KABELINDO

CABLE KABELINDO

GENERAL INFORMATION
PT Kabelindo Murni Tbk is Indonesia’s Wire & Cable Manufacturer Pioneer that was established in1972. With 50 years of experience and commitment in producing high quality cables and providing the best service for Private-Owned & State-Owned Enterprises, Kabelindo has proven itself to be a reputable company in making outstanding contibutions to important construction and infrastructure projects in Indonesia and overseas.

With the support of our professional team, modern facilities, solid expertise and strong experience, Kabelindo will always be committed to be your Best Partner and to serve your cable needs better.

Installation
Low voltage cables with PVC insulation are suitable for indoor and outdoor applications. The following recommendations should be followed to achieve the optimal cable service.

  1. Armoured cables are not recommended for tray applications, as they are heavy in weight and extra loads are exerted on the tray.
  2. Unarmoured cables are not recommended for direct buried applications, except if the quoted cables are designed and produced to pass direct burial test requirements
  3. A PVC jacket is a very stable material against a wide range of chemicals.
  4. Recommended minimum bending radius of cables :
  5. Important note for single core cables, The conductors of an A.C. circuit installed in a ferromagnetic enclosure shall be arranged so that all line conductors and the neutral conductor, if any, and the appropriate protective conductor are contained in the same enclosure. When such conductors enter a ferrous enclosure, they shall be arranged such that the conductors are only collectively surrounded by ferrous material.

Due to the wide range of cables in the catalogue, it is advisable, when ordering, to provide as much information as possible. Please use the following table as a guide:

  1. Cable standard / specification number.
  2. Voltage designation.
  3. Number of cores.
  4. Conductor size.
  5. Colour of outer sheath.
  6. Length of cables required and individual drum lengths.
  7. Any other special requirement, e.g. special PVC sheath material, drum weight limitation, etc.

Routine Final Inspection
Final inspection will be done for every length of product, such as :

  • Visual
  • Dimension
  • Conductor resistance
  • AC voltage test
  • Insulation resistance test

Ayo segera order produk-produk KABELINDO klik disini!