LBS FN 400 TPN 400A 415V

Load Break Switch (LBS) is a connecting switch or three-phase circuit breaker for placement outside sections on long poles, which is controlled manually or electronically. Load Break Switch similar to a voltage breaker device (PMT) or Circuit Breaker (CB) and is usually installed in electricity distribution lines.

 Load Break Switch The load breaker switch is also a vacuum interrupter system isolated by SF6 gas in a sealed, stainless steel tank. The cable system is fully insulated and the installation system is simple on piles which makes the installation process faster at low costs. The electronic control system is placed in a control box made of stainless steel so that it can be used in various environmental conditions. Control panel (user-friendly) and resistant to all weather conditions. Remote monitoring and control systems can also be added without the need to add a Remote Terminal Unit (RTU). The Load Break Switch functions to open and close the electricity flow when it is under load or not under load, including disconnecting it when a short circuit occurs.

In general, equipment versions Load Break Switch consist of:

• Pole Top Load Break Switc
• Pole Top Control Cubicle
• Control & Protection Module

Relevant documents Load Break Switch include:

• Window Switchgear Operating System (WSOS)
• Test and Training Set (TTS)
• Database Access Protocol (DAP)
• Specific Telemetry Protocol Implementations
• Remote Control Panel
• Field Workshop and Test Procedures
• CAPM Replacement Procedure

L&T - Schneider Electric's Load Break Switch is a Load Break Switch that complies with the latest specifications for modern low-voltage devices. L&T - Schneider Electric's Load Break Switch has outstanding electrical characteristics with a compact design, contributing to space savings and operational convenience. The L&T - Schneider Electric Load Break Switch has a switch construction and design that make it compact, safe, and very reliable. This L&T - Schneider Electric Load Break Switch uses a material containing polyamide glass, which has excellent line resistance (CTI), as wiring to prevent flashover between phases in the most severe conditions. The special design and configuration make this load break switch very reliable in withstanding high short circuit currents.

L&T - Schneider Electric Load Break Switch Features :

• Double termination contracts
• A polycarbonate sheath for terminal cable protection is included.
• Excellent switching and high short-circuit capacity
• Compact and reliable
• Versatile mounting options, namely front mounting, DIN 35 rear mounting, and enclosure mounting
• Fast, simple, and convenient: 22.5 mm single-hole mounting is offered for 16A/20A switches with a padlock option.
• Finger protection (IP 20)
• Screw terminals with fixed clamps for easy cable installation
• Additional main, neutral, or auxiliary contacts can be installed on either side of the switch at the location.
• The addition of a 4th pole is possible on site.

Load Break Switch L&T - Schneider Electric type FN & C-Line has several features, namely:

• Range 32A-2000A, 415V, AC 23A
• Adaptable to IEC 60947-3
• Door interlock & padlock facilities
• Depth-adjustable telescope shaft
• Flipable handle 1000A and so on
• Terminal shrouds on both sides