SURGE ARRESTER 3P+N 65KA 350V

Pilih Jumlah kutub
Pilih I maks (ka)
Kode Produk A9L65601
Nama Produk SURGE ARRESTER 3P+N 65KA 350V
Keterangan IPRD 65R WITH REMOTE TRAN SCHNEIDER ELECTRIC - A9L65601
Brand Schneider Electric
Jumlah Kutub 3P+N
Kapasitas Pemutusan 65kA
Tipe Surge Arrester
Ketersediaan Stok

Untuk unduh datasheet produk A9L65601 iPRD65r Modular Surge Arrester 3P+N 350V with Remote Transfert, silakan klik di sini!

Surge Arrester Schneider Electric

Surge Arrester merupakan alat yang dapat melindungi peralatan listrik dari lonjakan tegangan atau arus listrik yang disebabkan oleh gaya eksternal (seperti petir) maupun gaya internal. Umumnya, alat ini dipasang pada titik masuk sistem kelistrikan, dengan tujuan untuk melindungi keseluruhan sistem kelistrikan dari potensi kerusakan listrik yang disebabkan oleh arus listrik yang melonjak tiba-tiba.

Fungsi Surge Arrester:

  • Menyalurkan arus yang tinggi atau energi listrik yang berlebihan ke tanah
  • Membatasi tegangan pada peralatan listrik
  • Melindungi peralatan listrik dari kerusakan akibat tegangan yang berlebih

Karakteristik Teknikal:

  • Kode Produk : A9L65601
  • Brand : Schneider Electric
  • Nama Produk : SURGE ARRESTER 3P+N 65KA 350V 
  • Keterangan : IPRD 65R WITH REMOTE TRAN SCHNEIDER ELECTRIC - A9L65601
  • Deskripsi Pole : 3P+N
  • Tinggi : 85 mm
  • Lebar : 72 mm
  • Kedalaman : 69 mm
  • Berat : 492 gram
  • Warna : Putih (RAL9003)
  • Jenis Kelas Penangkal Lonjakan Arus : Tipe 2
  • Arus Pelepasan Maksimum Imax : 65kA
  • Arus Pelepasan Nominal In : 20kA
  • Standard Surge Arrester Schneider Electric A9L65601 : EN 61643-11 dan IEC 61643-11

Anda dapat berbelanja dengan aman di ListrikKita.com karena semua barang yang kami jual dijamin 100% asli, bergaransi resmi, dan dapat disertai dengan surat keaslian barang. Untuk informasi lebih lanjut atau ingin melakukan pembelian dalam jumlah besar bisa menghubungi tim sales atau marketing kami, dengan klik di sini. Selamat berbelanja!

This Acti9 iPRD65r surge arrester protects 3P+N installations. It allows quick replacement of damaged cartridges. This Type 2 device is recommended for very high risk level and incoming panel board. It offers remote reporting of the "cartridge must be changed" message. It can be turned over to allow the phase/neutral/earth cables to enter through either the top or the bottom. The associated circuit breaker Isc breaking capacity can go up to 50kA. It is compatible with TT and TN-S earthing system. The Imax rated discharge current is 65kA. The In nominal discharge current is 20kA. The Uc maximum continuous operating voltage in common mode is 260VAC between neutral and earth, and 350VAC between phase and earth. The Uc maximum continuous operating voltage in differential mode (between phase and neutral) is 350VAC. The Up Voltage protection level is 1.5kV in common mode (N/PE) and in differential mode (L/N). The Un rated service voltage is 230VAC or 400VAC. The operating frequency is 50Hz or 60Hz. The dimensions are (W) 72mm x (H) 85mm x (D) 69mm. The width in 9mm pitches is 8. The weight is 450g. The degree of protection is IP20 and IP40 in modular enclosure. The operating temperature is -25°C to 60°C. The storage temperature is -40°C to 85°C. This product complies with IEC 61643-11:2011 and EN61643-11:2012 standards.

Specification
Integrated short-circuit protection FALSE
System configuration TN-C FALSE
Leakage-current free FALSE
Nominal discharge surge current (8/20) 20 kiloampere
Voltage protection level L-N 1.5 Kilovolt
System configuration DC FALSE
System configuration TN FALSE
System configuration IT FALSE
Number of conductors (without earthing) 4
Voltage protection level 1.5 Kilovolt
System configuration TT TRUE
System configuration TN-S TRUE
Signalling at the device Optical
Degree of protection (IP) IP20
Nominal voltage AC 400 Volt
Max. overcurrent protection device, series connection (fuse) 80 Ampere
Max. overcurrent protection device, parallel connection (fuse) 80 Ampere
Max. discharge surge current (8/20) 65 kiloampere
Max. conductor cross section solid (solid, stranded) 35 Square millimetre
Max. conductor cross section flexible (fine-strand) 35 Square millimetre
Mounting method DIN rail (top hat rail) 35 mm
System configuration TN-C-S FALSE
Construction size 4 modular spacing
System configuration other FALSE
With remote signalling contact TRUE
Voltage protection level N-PE 1.5 Kilovolt
Integrated backup fuse FALSE
Category type 2 TRUE
Max. continuous voltage AC 350 Volt
Short-circuit breaking capacity (Isccr) 50 kiloampere
Documents
Image of product
Image of product

Stock Tersedia

Rp.2.783.575,-

50% Rp.5.567.150,-

Add to Cart

Free Ongkir Jabodetabek Menggunakan Kurir Toko Listrikkita

Mungkin Anda Suka

WhatsApp