Complete Guide to ATS CHINT: Functions, Advantages, and Its Specifications

Complete Guide to ATS CHINT: Functions, Advantages, and Its Specifications

ATS CHINT is the right electrical device for smooth industrial operations. What are its advantages?

Electronic equipment is currently widely used in the industrial sector for smooth production processes. If there is the slightest electrical disturbance, the production process can be delayed and can cause financial losses. Therefore, a power source is needed that can be on for 24 hours so that industrial operations are not disrupted.

The way is to use the ATS (Automatic Transfer Switch) electrical device! This device has the ability to automatically switch the load from the main source to the backup source when a disturbance occurs.

As the world's leading provider of smart energy solutions, CHINT presents ATS products that can help you ensure the sustainability of industrial operations and maintain optimal productivity.

Read this article to the end to discover the advantages of the ATS CHINT product!

What is the Function of ATS CHINT?

ATS stands for Automatic Transfer Switch, which literally means a switch that works automatically. This tool is an electrical device in the form of an electrical circuit that can function as an automatic switch. So, ATS will work automatically when the electricity source from PLN is cut off or experiences a blackout, where the switch will move to another backup power source. Then, when the electricity source from PLN is back on, this device will transfer the backup power source back to PLN.

ATS CHINT can transfer power according to needs without having to use human power to operate it. Several types of ATS will be distinguished based on the power capacity needed or based on the Phase and Ampere that go through the panel.

The CHINT ATS device functions to regulate the flow of electricity between the main source and also the backup source, such as a battery or generator. In addition, the function of the ATS is also as an automatic switch when there is a planned or sudden power outage or when there is trouble in the electricity network that causes the electricity to go out.

How Does ATS CHINT Work?

ATS CHINT works by controlling two sources of electricity, and when a sudden blackout occurs, the device will transfer from another power source, and when the power outage is over, the device will automatically switch again.

When the ATS device detects a failure or interference in the main power source, the switch will automatically cut off the electricity from the main source. This aims to isolate the main source that is experiencing problems and prepare the ATS to divert the power supply to the backup source.

Then, after the main power supply has been disconnected, the logic control on the ATS will give a command to divert the power supply to the backup source; here an example is a generator. After that, the backup switch on the ATS panel will be activated, and the power supply will be diverted from the main source to the generator.

Next, the logic control on the ATS will give a command to turn on the generator, and the generator will turn on automatically to start generating electricity. On the other hand, this logic control will also monitor the condition of the generator and ensure that the generator will operate properly before supplying power to the load.

When the main power source has been restored and can be turned on again, the ATS CHINT will detect the presence of power supply from the main source. At this time, the ATS logic control will disconnect the power supply from the generator and divert it back to the main source. The generator will also turn off automatically to save fuel.

The main switch on the ATS will be reactivated to restore the power supply to the main source, where the load will be reconnected to the main source. The ATS will continue to monitor the condition of the power flow and be ready to act again if there is a disruption or failure in the main source.

What are the Advantages and Specifications of CHINT ATS?

As a globally renowned smart energy solution, CHINT offers the most complete range of ATS products for industrial purposes, such as ATS NXZB and ATS NXZM. Both types of ATS can be applied to a three-phase four-wire duplicate supply network.

CHINT ATS has the advantage of being able to switch one or more circuits from the load, from one resource to another, to ensure a normal power supply to the load circuit. Another advantage is that this tool can be used in a wide range of applications, such as places that use electricity for industrial and commercial purposes, high-rise buildings, and residential homes.

After knowing the function, how it works, and also its advantages, you may be curious about the complete specifications of this one electrical device. The following are the complete specifications of CHINT ATS products, namely the NXZB and NXZM types!

1. ATS CHINT NXZB

Specifications:

  • Rated Current: 63A
  • Rated Operating Voltage: 400V
  • Number of Poles: 4P
  • Controller: C type (intelligent), CT (intelligent with communication)
  • Compliant with IEC 60947-1 and IEC 60947-6-1 standards

2. ATS CHINT NXZM

Specifications:

  • Rated Current: 125-800A
  • Rated Operating Voltage: 400V/415V
  • Number of Poles: 4P
  • Breaking Capacity Code: S
  • Compliant with IEC 60947-1 and IEC 60947-6-1 standards

That's the complete explanation and specifications of the ATS CHINT NXZB and NXZM! With its capable specifications and advantages, this ATS product is the right choice to maintain smooth industrial operations!
 

Get the product by ordering it now here!

Or do you want to find various interesting information about electricity and complete specifications of other electrical products? Just check it out in other Listrik Kita's articles!