PRD1 25R MODULAR SURGE ARRESTER 3POLES+N 350V WITH REMOTE TRANSFER

Untuk unduh datasheet produk 16332 PRD1 25R Modular Surge Arrester 3 Poles + N 350V with Remote Transfer, silakan klik di sini!

Surge Arrester Schneider Electric

Surge Arrester merupakan alat yang dapat melindungi peralatan listrik dari lonjakan tegangan atau arus listrik yang disebabkan oleh gaya eksternal (seperti petir) maupun gaya internal. Umumnya, alat ini dipasang pada titik masuk sistem kelistrikan, dengan tujuan untuk melindungi keseluruhan sistem kelistrikan dari potensi kerusakan listrik yang disebabkan oleh arus listrik yang melonjak tiba-tiba.

Fungsi Surge Arrester:

• Menyalurkan arus yang tinggi atau energi listrik yang berlebihan ke tanah
• Membatasi tegangan pada peralatan listrik
• Melindungi peralatan listrik dari kerusakan akibat tegangan yang berlebih

Karakteristik Teknikal:

• Kode Produk : 16332
• Brand : Schneider Electric
• Nama Produk : PRD1 25R MODULAR SURGE ARRESTER 3POLES+N 350V WITH REMOTE TRANSFER
• Keterangan : MODULAR SURGE ARRESTER SCHNEIDER ELECTRIC 16332
• Deskripsi Pole : 3P+N
• Tinggi : 90 mm
• Lebar : 142,8 mm
• Kedalaman : 70 mm
• Berat : 1,43 kg
• Material : PBT (polybutylene terephthalate)
• Warna : Anthracite Grey (RAL7016)
• Jenis Kelas Penangkal Lonjakan Arus : Tipe 1+2
• Tegangan Operasi Kontinu Maksimum : 350V (L-N atau N-PE)
• Arus Pelepasan Nominal : 25kA dengan maksimum 40kA
• Standard Surge Arrester Schneider Electric 16332 : EN 61643-11 dan IEC 61643-11

Anda dapat berbelanja dengan aman di ListrikKita.com karena semua barang yang kami jual dijamin 100% asli, bergaransi resmi, dan dapat disertai dengan surat keaslian barang. Untuk informasi lebih lanjut atau ingin melakukan pembelian dalam jumlah besar bisa menghubungi tim sales atau marketing kami, dengan klik di sini. Selamat berbelanja!

This Multi9 PRD1 product is a surge arrester with pluggable cartridge. It has 3P+N pole. The maximum continuous operating voltage is 350V (L-N or N-PE). It is available for TT or TN-S earthing system. It is a type 1 and type 2 surge arrester. It protects electrical installations against direct lightning strikes by finely clipping the lightning wave overvoltages. It is fitted with easy-to-replace withdrawable cartridges. The device has an end-of-life indication (white for correct operation, red at end of life) with remote signalling. The nominal discharge current (impulse 8-20 µs) is 25kA with a maximum of 40kA. The Uc maximum continuous operating voltage in differential mode (between phase and neutral) is 350VAC. The Uc maximum continuous operating voltage in common mode (between neutral and earth) is 350VAC. The maximum lightning current Iimp (impulse current 10-350 µs) is 25kA between L-N and 100kA between N-PE. The rated voltage network is 230VAC or 400VAC. The voltage protection level goes up to 1.5kV. The degree of protection is IK05 and IP20 on its terminals becoming IP40 once in modular enclosure. It can be mounted on DIN rail for modular installation. Its width is 16 modules of 9mm. This product complies with IEC/EN 61643-11 standard.

Specification

System configuration TN-C	FALSE
Voltage switching spark gap technology	TRUE
Voltage protection level L-N	1.5 Kilovolt
System configuration DC	FALSE
System configuration TN	FALSE
System configuration IT	FALSE
Voltage protection level	1.5 Kilovolt
Number of poles	4
System configuration TT	TRUE
System configuration TN-S	TRUE
Signalling at the device	Optical
Degree of protection (IP)	IP20
Nominal voltage AC	400 Volt
Max. conductor cross section solid (solid, stranded)	35 Square millimetre
Max. conductor cross section flexible (fine-strand)	35 Square millimetre
Mounting method	DIN rail (top hat rail) 35 mm
System configuration TN-C-S	FALSE
System configuration other	FALSE
Construction size	8 modular spacing
Test class	Type 1 + 2
Voltage protection level N-PE	1.5 Kilovolt
Integrated backup fuse	FALSE
Max. continuous voltage AC	350 Volt
Remote signalling	TRUE

Documents

• Declaration of conformity - EU Declaration of Conformity Schneider Electric
• Instruction sheet - Surge arrester PRD1 25r (Type1+Type2) - Instruction Sheet